Our residential and commercial paving is cost-effective and our technique is quick, methodical, and very thorough, ensuring an extra long life for your new asphalt driveway or blacktop.
Chip and Seal paving is a hot layer of tar with rock spread over it, usually used for long roads. This provides you with a hard driving surface. Customer satisfaction gurannteed. An inexpensive way to extend the life of old asphalt up to 20 years.
We can install a road base for your new driveway, finish the grading on a new construction, or clean up and level after asphalt paving.
Road grading is done turn-key with your choice of materials, and can be as simple as applying fresh gravel on your driveway, to a major new excavation such as cutting out a road, excavating for utilities, or fixing drainage issues.
Seal coat is applied in thin coats to protect off-highway pavement surfaces, such as parking lots and drive ways and is the most important element of a pavement maintenance plan. Seal coat will give you the look of new asphalt without the cost.
Hot Mix Asphalt (HMA) is a combination of approximately 95% stone, sand, or gravel bound together by asphalt cement, a product of crude oil. The asphalt is placed, and then compacted using a heavy roller, which is driven over the asphalt. Traffic is generally permitted on the pavement as soon as the pavement has cooled.
Cracks in the pavement should be filled annually to ensure optimal longevity. Crack fill is best applied with the crack dry, and clean of debris. Filling applies to everything from county roads to driveways, and is an inexpensive way to maintain asphalt.
We can re-stripe old lines, or lay out lines for new lots. We are experts at parking lot striping and use only professional striping equipment as well as the highest quality paints available to ensure you get not only the cleanest and straightest lines.